Magnum Energy ME-RC Betreibershandbuch PDF herunterladen (Seite 9)

 2003 - Magnum Energy, Inc.

Soft Keys, continued:

Setup –

Configures the inverter/charger. Options include:

• Search

Used to set the search watts at which the inverter will come

out of “sleep” mode. Selections are 3-75 watts.

• LBCO (Low Battery Cut Out)

Used to set the DC voltage level to shut down the inverter

and protect the batteries from over-discharge damage.

Selections are 9.0 VDC, 10.0 VDC and 11.0 VDC. DC volts

must reach and maintain LBCO setting for 2 minutes before

inverter shut down is initiated.

• Battery Size

Used to select the approximate battery bank capacity.

Selections are in 200 amp increments from 200 -1000

amps. Battery capacity is also used to determine absorption

time during battery charging. See Chart 2.

• Battery Charge Rate

Used to set the maximum charge rate during bulk, absorp-

tion or float charge. Selections are in 10 amp increments

from 10% - 100%.

• Battery Type

Used to select battery type for the battery charge profile.

Selections are Gel, AGM (Absorbed Glass Mat), Liquid Lead

Acid (Flooded) and Custom (future). See Chart 1.

• Contrast

Used to adjust the LCD contrast.

• Factory Reset

Restores all settings to factory defaults. press and hold the

switch the switch for 5 seconds. “Reset Complete” will be

appear in the display. See Chart 3.

Tech – (display only)

Reserved for future, this feature is used for troubleshooting

the inverter/charger. Options include FET temp, transformer

temp, battery temp and fault record. Fault record tracks the

last 10 inverter/charger shut down faults.

3. Operation, continued

1 2 3 4 5 6 7 8 9 10 11 12 13 14 15

Keine Kommentare

Magnum Energy ME-RC Betreibershandbuch Seite 9